Immersion Heaters
Tubular Heaters
Finned Tubular Heaters
CalRod® Heaters
Mould Heaters
Duct Heaters
Tank Heaters
Cartridge Heaters
Band Heaters
Strip Heaters
Mica Strip Heaters
  High Density Strip
Heaters
Radiant Heaters
Temperature Controls
Thermocouples & RTD’S
Relays
Drum Heaters
Silicone Rubber Heaters
Technical Data
   
   

Mica Strip Heaters are constructed by winding a nickel-chrome resistance ribbon around mica insulation and encapsulated in a stainless steel sheath. They are available in an extensive variety of sizes and shapes with options for holes, notches and cut-outs. A number of threaded terminals, wire lead options and terminal boxes offer great flexibility for field wiring. With temperature capabilities of up to 900°F, these heaters are ideal for plastic processing applications and for anywhere heat is needed on a flat or curved surface.


ELECTRICAL TERMINATIONS

     
 
Wire Leads
High Temperature Mica Insulated Fiberglass (900°F)

Stainless Braid Over Fiberglass Leads

Armour Cable Over Fiberglass
 
     
     
 
Threaded Terminals
10-32 Threaded Stud Terminals
 
     
     
 
Terminal Boxes
Stainless Steel Terminal Box Over Threaded Stud Terminals

European Style Box Straight or 90° Construction
 
     


STANDARD CONSTRUCTIONS

 
   
Fiberglass Leads - Specify location and length of leads at time of order.   90 Degree Armor Cable with Fiberglass Leads - Specify location and length of leads at time of order.

 
   
Metal Braid with Fiberglass Leads - Specify location and length of leads at time of order.   Fiberglass Leads with Protective Sleeve - Leads exit midway of either edge. Specify length at time of order

 
   
Armor Cable with Fiberglass Leads - Specify location and length of leads at time of order.   Fiberglass Leads with Protective Sleeve - Leads exit from any edge of heater. Specify length at time of order.

 
   
Fiberglass Leads with Metal Braid - Leads exit midway of either edge. Specify length at time of order.   Fiberglass Leads with Metal Braid - Leads exit from any edge of heater. Specify length at time of order.

 
   
10-32 Threaded Terminals - Minimum width required- 7/8".   10-32 Threaded Terminals - Minimum width required- 7/8". Specify location at time of order.

 
   
10-32 Threaded Terminals - Minimum width required 2.00"-Specify location at time of order.   Mica strip heaters are available in irregular shapes
and can be made to conform to curved surfaces.
Mounting holes aid in clamping the heaters to any
surface. Holes and cutouts are useful for the
installation of thermocouples and for clearance of
bolts and other obstructions.

 
   
MTC
Metal Terminal Box
  CTP
Ceramic Terminal Posts are available on all threaded terminals.